[RITSlist] U25b Grilles

[Steven Suhs]

Randy,
   
  Remove the vertical posts that hold the dynamic brake grids also. The screen lies on the lip and there is a plastic frame that goes on top of the screen and fits into some holes in each corner opening on the body.
   
  Hope this helps
   
  Steve Suhs

Randy Hubmann <routerock at sbcglobal.net> wrote:
          Hi,
  I am going to detail several Stewart U25B's and before they go under the knife I had a few questions. I know the dynamic brake grids should be removed, but does that include the 7 vertical supports that hold the grids in place? If so, I would like to here from someone who has done this to see if they have had any troubles with the screens falling through to the inside. I wanted to make sure that the screens were rigid enough to stay put with only that small lip to hold them in place.
  Thanks
  Randy
    
---------------------------------
  NOTE: This message was trained as non-spam. If this is wrong, please correct the training as soon as possible. 
Spam
Not spam
Forget previous vote

_______________________________________________
ritslist mailing list
ritslist at thunder.simpson.edu
http://thunder.simpson.edu/mailman/listinfo/ritslist



-- 
BEGIN-ANTISPAM-VOTING-LINKS
------------------------------------------------------

NOTE: This message was trained as non-spam.  If this is wrong,
please correct the training as soon as possible.

Teach CanIt if this mail (ID 3222917) is spam:
Spam:        https://storm.simpson.edu/canit/b.php?c=s&i=3222917&m=2572a5338db9
Not spam:    https://storm.simpson.edu/canit/b.php?c=n&i=3222917&m=2572a5338db9
Forget vote: https://storm.simpson.edu/canit/b.php?c=f&i=3222917&m=2572a5338db9
------------------------------------------------------
END-ANTISPAM-VOTING-LINKS

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://thunder.simpson.edu/pipermail/ritslist/attachments/20070201/d5134d4d/attachment-0001.html